Tray Branches Gallery

Used to place Raceways Branch components.

Accessed from the Raceways ribbon:

The following gallery displays which can be left floating or docked to the drawing area.

The following table shows the component options in the gallery and their key in syntax are also listed. Selecting a tool from one of the placement toolboxes activates the Place Component tool settings. The generic placement settings, along with the unique set of dimensional and data properties provide the core workflow used to accurately position piping components in the model.

Component	Description	<component class> in Placement Key In syntax (Mechaddin PLACE <component class> dsc=Piping)
Horizontal Tee	Places a Horizontal Tee where user can define Width, Depth and type before placement.	TRAY_HORIZONTAL_TEE
Horizontal Expanding Tee	Places expanding tee which expands the run size of the original tray. User can select the expanded size from the Spec Record Selection dialog.	TRAY_HORIZONTAL_TEE_EXPANDING
Horizontal Reducing Tee	Places reducing tee which reduces the run size of the original tray. User can select the reduced size from the Spec Record Selection dialog.	TRAY_HORIZONTAL_TEE_REDUCING
Horizontal Cross	Places a cross which is used as an intersect for four tray sections. User can define Width, Depth and Type before placement.	TRAY_HORIZONTAL_CROSS
Horizontal Expanding Cross	Places an expanding cross which is used to intersect larger with tray segments with smaller ones. User can select the expanded size from the Spec Record Selection dialog.	TRAY_HORIZONTAL_CROSS_EXPANDING
Up Tee		TRAY_UP_TEE
Down Tee		TRAY_DOWN_TEE
Left Wye	Places a left facing wye which branches the main tray run. User can select the correct wye (with the desired Radius) from the Spec Record Selection dialog.	TRAY_LEFT_WYE
Right Wye	Places a right facing wye which branches the main tray run. User can select the correct wye (with the desired Radius) from the Spec Record Selection dialog.	TRAY_RIGHT_WYE